How to set a static IP address using the LAN-Stick-D

If you need to assign a static IP address for network stability or device management, you can easily configure it using the LAN-Stick-D. Follow the steps below for a smooth setup.

Physical Installation

1. Connect the LAN-Stick-D to the designated communication port on your inverter.

2. Use an Ethernet cable to connect the LAN-Stick-D to your router or network switch.
   This ensures a reliable connection to your local network.

IP Address Configuration

Default Settings

• The LAN-Stick-D is preconfigured with a default static IP address:
  10.10.100.254

Test Connection

1. Connect the LAN-Stick-D directly to your computer using a network (Ethernet) cable.

2. Configure your computer’s Ethernet settings to obtain an IP address automatically (DHCP).

Set a Static IP Address

1. Open a web browser and enter: http://10.10.100.254

2. Log in with the following credentials:

   • Username: admin

   • Password: (the one you created during initial setup)

3. Go to: Advanced > LAN Settings

4. Enter a static IP address that:

   • Matches your network’s IP range

   • Does not conflict with any other devices

5. Click Save.

The LAN-Stick-D will now use the static IP address you assigned.